—Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters for a station.
Storing the station names
1 Tune in a station whose name you want to store.
2 Press (MENU), then press either side of (DISC/PRST) repeatedly until “Name Edit” appears.
3 Press (ENTER).
4 Enter the characters.
1Press (+) side of (DISC/PRST) repeatedly to select the desired characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t < t . t )
If you press
If you want to put a blank space between characters, select “ ” (under- bar).
2Press (+) side of (SEEK/AMS) after locating the desired character.
The next character flashes.
If you press
3Repeat steps 1 and 2 to enter the entire name.
5 To return to the normal radio reception, press (ENTER).
20
Tips
•To erase or correct a name, enter “ ” (under- bar) for each character.
•When storing station names, there is an alternative method; press and hold (LIST) for two seconds instead of doing steps 2 and 3. Likewise, you can complete the operation by pressing and holding (LIST) for two seconds instead of doing step 5.
Displaying the station name
Press (DSPL) during radio reception.
Each time you press (DSPL), the item changes as follows:
Station name* y Frequency
*If the station name of a station is not stored, “NO Name” appears in the display for one second.
Erasing the station name
1
2 Press (MENU), then press either side of (DISC/PRST) repeatedly until “NameDel” appears.
3 Press (ENTER).
4 Press either side of (DISC/PRST) to select the station name you want to erase.
5 Press (ENTER) for two seconds.
The name is erased.
Repeat steps 4 through 5 if you want to erase other names.
6 To return to the normal radio reception, press (MENU).
Note
When you erase all of the station names, “NO Data” appears in step 5.
20 | 1/20/00, 10:13 PM |