Locating a station by

name — List-up

1 Press (LIST).

The name assigned to the station currently tuned appears in the display.

2 Press either side of (DISC/PRST) repeatedly until you find the desired station.

When no name is assigned to the selected station, the frequency appears in the display.

3 Press (ENTER) to tune in the desired station.

Notes

•Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. To turn off the display, press

(LIST).

•When you connect a TV tuner, the list-up indication will not appear in the display of the unit.

DSP

Setting the equalizer

You can select an equalizer curve for five music types (Rock, Vocal, Groove, Techno, and Custom).

You can store and adjust the equalizer settings for frequency and level.

Selecting the equalizer curve

1 Press (SOURCE) to select a source (tuner, CD, or MD).

2 Press (SOUND) repeatedly until “EQ” appears.

Each time you press (SOUND), the item changes as follows:

EQ (equalizer curve) t POS (listening position)

tBAL (right-left) t F (front speaker volume)

tR (rear speaker volume) t

SUB (subwoofer volume) t VOL (volume) t EQ (equalizer curve)

3 Press either side of (SEEK/AMS) to select the desired equalizer curve.

Each time you press (SEEK/AMS), the item changes as follows:

Rock y Vocal y Groove y Techno y Custom

yoff y Rock

To cancel the equalizing effect, select “off.” After three seconds, the display returns to the normal playback mode.

21

01US05RAD-U.p65

21

1/20/00, 10:13 PM