Other operations

 

Rotate the VOL control to

 

adjust the volume.

Press (ATT) to

 

 

attenuate the

 

sound.

 

OFF

 

Press (OFF) to

 

turn off the unit.

 

Press (SOUND) to

 

adjust the volume and

 

sound menu.

Press (DSPL) to display the memorized names.

Tip

If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for two seconds to turn off the clock indication after turning off the engine.

Changing the operative direction

The operative direction of controls is factory- set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Press (SOUND) for two seconds while pushing the VOL control.

Tip

You can also change the operative direction of these controls with the unit (see “Changing the sound and display settings” on page 29).

Attenuating the sound

Press (ATT) on the rotary commander or the card remote commander.

“ATT on” flashes momentarily.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

28

01US06OTH-U.p65

28

1/20/00, 10:14 PM