1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Press the number button ((1) to (6)) on which the desired station is stored.
Tip
Press either side of (DISC/PRST) to receive the stations in the order they are stored in the memory (Preset Search Function).
If you cannot tune in a preset station
Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.
Note
If the automatic tuning stops too frequently, press (MENU), then press either side of (DISC/PRST) repeatedly until “Local” (local seek mode) is displayed. Then press (+) side of (SEEK/AMS) to select “Local on.” Press (ENTER).
Only the stations with relatively strong signals will be tuned in.
Tips
•When you select the “Local on” setting,
“LCL Seek” appears while the unit is searching for a station.
•If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning).
If FM stereo reception is poor
—Monaural Mode
1 During radio reception, press (MENU), then press either side of (DISC/PRST) repeatedly until “Mono” appears.
2 Press (+) side of (SEEK/AMS) until “Mono on“ appears.
The sound improves, but becomes monaural (“ST” disappears).
3 Press (ENTER).
To return to normal mode, select “Mono off” in step 2 above.
If FM stereo broadcast becomes monaural
If interference occurs, the “IF Auto” function of this unit will automatically avoid noise and narrow the reception frequency. In such cases, some FM stereo broadcasts may become monaural. If you would like to listen to such broadcasts in stereo, manually switch to the “Wide” setting.
1 During radio reception, press (MENU), then press either side of (DISC/PRST) repeatedly until “IF Auto” appears.
2 Press (+) side of (SEEK/AMS) repeatedly to select desired setting.
IF Auto y Wide
3 Press (ENTER).
Note
When you widen the frequency signal reception setting (“Wide“ mode), some interference may occur.
19
19 | 1/20/00, 10:13 PM |