Erasing the disc memo
1 Press (SOURCE) repeatedly to select “CD.”
2 Press (MODE) repeatedly to select the CD unit.
3 Press (MENU), then press either side of (DISC/PRST) repeatedly until “NameDel” appears.
4
5 Press either side of (DISC/PRST) repeatedly to select the disc name you want to erase.
6 Press (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase other names.
7 Press (MENU) twice.
The unit returns to normal CD playback mode.
Notes
•When a personalized label is erased, the original CD TEXT information will appear in the display.
•When you erase all of the disc names, “No Data” appears in step 5.
—
You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD” (page 15).
1 Press (LIST).
The name assigned to the current disc appears in the display.
When you assign a disc memo label to a CD TEXT disc, it takes priority over the original CD TEXT information.
2 Press either side of (DISC/PRST) repeatedly until you find the desired disc.
To locate preceding discs
To locate succeeding discs
3 Press (ENTER) to play the disc.
Notes
• After a disc name has been displayed for five seconds, the display returns to normal playback mode. To turn off the display, press (LIST).
• The track names are not displayed during MD or CD TEXT disc playback.
• If there are no discs in the magazine, “NO Disc” appears in the display.
• If a disc has not been assigned a custom file, “********” appears in the display.
• If the disc information has not been read by the unit, “?” appears in the display. To load a disc, first press the number button, then choose the disc that has not been loaded.
• Some letters cannot be displayed (during MD or CD TEXT disc playback).
16
16 | 1/20/00, 10:13 PM |