Adjusting the front and rear fader

1 Press (SOURCE) to select a source (tuner, CD, or MD).

2 Press (SOUND) repeatedly until “F” for the front speakers or “R” for the rear speakers appears.

3 Press either side of (SEEK/AMS) to adjust the volume of front/rear speakers.

4 Press (MENU) twice.

After three seconds, the display returns to the normal playback mode.

Adjusting the cut-off frequency and the output volume level for the front/rear speakers

To match the characteristics of the installed speaker system, you can adjust the output volume level and the cut-off frequency of the speakers.

Level

Cut-off frequency

 

Frequency (Hz)

1 Press (MENU).

2 Press either side of (DISC/PRST) repeatedly until “Front HPF” or

“Rear HPF” appears, then press (ENTER).

3 Select the desired frequency and level.

1Press either side of (SEEK/AMS) to select the cut-off frequency.

Each time you press (SEEK/AMS), the frequency changes as follows:

off y 78 Hz y 99 Hz y 125 Hz y 157 Hz y 198 Hz

2Press either side of (DISC/PRST) to adjust the volume level .

The volume is adjustable by 1 dB steps from –12 dB to +12 dB.

4 Press (MENU) twice.

When the effect setting is complete, the normal playback mode appears.

Tip

When you lower the volume all the way down, “ATT” appears and the cut-off frequency is disabled.

24

01US05RAD-U.p65

24

1/20/00, 10:13 PM