Radio reception
Problem | Cause/Solution |
Preset tuning is not possible. | • Memorize the correct frequency. |
| • The broadcast signal is too weak. |
|
|
Automatic tuning is not | The broadcast signal is too weak. |
possible. | t Use manual tuning. |
|
|
The stations cannot be | Connect an power antenna control lead (blue) or accessory |
received. | power supply lead (red) to the power supply lead of a car’s |
The sound is hampered by | antenna booster. |
noises. | (When your car has |
| glass only.) |
The “ST” indication flashes.
•Tune in the frequency accurately.
•The broadcast signal is too weak. t Set to the Mono mode (page 19).
Interference occurs during FM | The Wide mode is selected. |
reception. | t Set the IF mode to IF Auto (page 19). |
|
|
DSP functions
Problem | Cause/Solution |
No sound, or sound is too low. The volume of the speakers may have been automatically lowered in order to maximize the effect of the listening position adjustment.
t Press either side of (SEEK/AMS) to adjust the balance.
The speaker balance can be set separately for DSP on mode and DSP off mode (page 23).
The volume level cannot be increased.
The DSO function is activated and all the filters for the volume level are adjusted to +12 dB.
38
38 | 1/20/00, 10:14 PM |