Adjusting the equalizer curve
1 Press (MENU).
2 Press either side of (DISC/PRST) repeatedly until “EQ Tune” appears, then press (ENTER).
3 Press either side of (SEEK/AMS) to select the desired equalizer curve, then press (ENTER).
Each time you press (SEEK/AMS), the item changes as follows:
Rock y Vocal y Groove y Techno y Custom
yoff y Rock
4 Select the desired frequency and level.
1Press either side of (SEEK/AMS) to select the desired frequency.
Each time you press (SEEK/AMS), the frequency changes as follows:
62 Hz y 157 Hz y 396 Hz y 1.0kHz y 2.5kHz y 6.3kHz y 16.0kHz
2Press either side of (DISC/PRST) to adjust the desired volume level.
The volume is adjustable by 1 dB steps from
To restore the
5 Press (MENU) twice.
When the effect setting is complete, the normal playback mode appears.
You can set a delayed time for the sound to reach the listeners from the speakers.
In this way, the unit can simulate a natural sound field so that you feel as if you are in the centre of the sound field no matter where you sit in the car.
|
|
| Display | Centre of sound |
|
|
| window | field |
|
|
| POS | Normal setting |
1 |
| 2 | All | (1 + 2 + 3) |
| POS | Front part | ||
|
|
| ||
|
|
| Front | (1 + 2) |
|
|
| POS | Right front (2) |
| 3 |
| ||
|
|
| ||
|
| POS |
| |
|
|
| Left front (1) | |
|
|
| ||
|
|
|
| |
|
|
| POS | Rear part (3) |
|
|
| Rear | |
|
|
|
| |
|
|
| POS | Cancel |
|
|
| off | |
|
|
|
|
1 Press (SOURCE) to select a source (tuner, CD, or MD).
2 Press (SOUND) repeatedly until “POS” appears.
3 Press either side of (SEEK/AMS) to select the desired listening position.
Each time you press (SEEK/AMS), the item changes as follows:
All y Front y
To cancel the POS mode, select “off.” After three seconds, the display returns to the normal playback mode.
22
22 | 1/20/00, 10:13 PM |