1Connect the speakers.

Connect the right and left speaker cords to the SPEAKER jacks as shown below.

Insert only the stripped portion

Gray/Solid (3)

Black/Stripe (#)

2Connect the FM and AM antennas.

Set up the AM loop antenna, then connect it.

Plug type A

AM loop antenna

Insert only the

stripped portion*

Extend the FM lead antenna horizontally

* Strip off an end-portion of wire covering.

Plug type B

 

 

Insert only the

AM loop antenna

stripped portion*

Extend the FM lead antenna horizontally

* Strip off an end-portion of wire covering.

Plug type C

Insert only the

AM loop antenna

stripped portion*

Extend the FM lead

North American model:

antenna horizontally

Connect white side.

 

Other models:

 

Connect brown side.

* Strip off an end-portion of wire covering.

Note

Keep the antennas away from the speaker cords.

3Connect a TV.

Select one of the following connections.

Connection A (For all models)

If your TV has component video input jacks, connect your TV to the COMPONENT VIDEO OUT jacks with a component video cord (not supplied). For European and Russian models, make sure to set the VIDEO OUT SELECTOR to COMPONENT.

If your TV is compatible with progressive format file signals, use this connection and set “PROGRESSIVE.” For details, see “To change the type of signal output from the system” (page 24).

VIDEO OUT SELECTOR*

* European and Russian models only

10GB