To change the AM tuning interval (except for European and Russian models)

The AM tuning interval is factory-preset to

9kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding x on the unit, press TUNER/BAND on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in Power Saving Mode (page 37).

Tip

To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.

Listening to the radio

You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first

Tuner

(see “Presetting radio stations” (page 28)).

1

Press TUNER/BAND repeatedly to

 

2

select “FM” or “AM.”

 

Press PRESET + or – repeatedly to

 

 

select the desired preset station.

 

 

 

 

 

 

 

 

 

Preset number

Frequency

continued

29GB