Sony CMT-SX2D, CMT-DX2D connected component, component, Recording on a connected, Recording audio from a, DVD, 43GB, start playing, Connect audio cords, Components Optional

Recording audio from a			Recording on a connected
connected component			component
1	Connect audio cords.	1		Connect a digital optical cord.
	See “Hooking up optional components”			See “Hooking up optional components”
2	(page 41).	2		(page 41).
	Start recording manually.			Press DVD (or FUNCTION + or –
	See “Recording on a tape manually”			repeatedly) to switch the function to

(page 32).	DVD.
	Playback starts automatically if a disc with
	auto playback function is loaded. Press x to
	stop playback. To cancel Resume Play,
	press x twice.
	3 Start recording with the connected
	digital component (MD deck, etc.).
	Refer to the operating instructions provided
	with the connected component.
	4 Press H (or DVD NX on the unit) to
	start playing.
	Notes
	• You cannot make a digital recording in the following
	cases.
	– Copy guarded DVDs
	– DVD Dolby Digital or DTS bit stream output
	– CD-Rs/CD-RWs recorded in music CD format
	• You cannot make a recording when “Dolby Digital”
	or “DTS” under “AV” is set to “Bit Stream.”

Components Optional

43GB