Listening to audio from a connected component
Use buttons on the unit for the operation.
1 Connect audio cords.
See “Hooking up optional components” (page 41).
2 Turn the VOLUME control towards – to turn down the volume.
3 Press TV to switch the function to TV.
4 Start playing the connected component.
5 Turn the VOLUME control to adjust the volume.
Enjoying the 5.1 channel sound with the optional amplifier
1 Connect a digital optical cord.
See “Hooking up optional components” (page 41).
2 Connect 6 speakers to an AV amplifier equipped with a decoder.
For the speaker placement, refer to the operating instructions supplied with the connected amplifier.
3 Press 
DISPLAY in stop mode.
The Setup Display appears.
4 Press < or , repeatedly to select “AV,” then press ENTER.
5 Press M or m repeatedly to select “Dolby Digital” or “DTS,” then press
ENTER.
6 Press M or m repeatedly to select “Bit
Stream,” then press ENTER.
7 Press 
DISPLAY to turn off the Setup Display.
8 Switch the output to 5.1 channel Dolby Digital sound or 5.1 channel DTS sound.