To record a CD by specifying track order
You can record only your favorite CD tracks using Program Play. Between steps 3 and 4, perform steps 2 to 5 of “Creating your own program” (page 19).
To stop recording
Press x.
Notes
•CD Synchro Recording is not available with DVD, VIDEO CD, MP3 audio tracks and JPEG image files.
•You cannot listen to other sources while recording.
•If the play mode is set to Repeat Play or Shuffle Play, it automatically switches to Normal Play in step 4.
•The sound effect automatically switches to “FLAT” in step 4.
Recording on a tape manually
— Manual Recording
You can record just the portions you like from a disc (DVD, VIDEO CD, CD and MP3) or radio program on a tape.
You can also record from connected components (see “Hooking up optional components” (page 41)).
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Press one of the following buttons to select the desired source to record.
•DVD NX: To record from this system’s CD/DVD player. Playback starts automatically if a disc is loaded. Press x to stop playback. To cancel Resume Play, press x twice.
•TUNER/BAND: To record from this system’s tuner.
•TV: To record from the optional component connected to TV IN L/R jacks.
3 Press z REC PAUSE/START.
The tape deck stands by for recording. “REC” flashes.
4 Press z REC PAUSE/START, then start playing the desired source to record.
Recording starts.
To stop recording
Press x.
Notes
•You cannot listen to other sources while recording.
•If no sound is being recorded when recording from a DVD, set “Dolby Digital” or “DTS” to “PCM” under “AV” in the Setup Display.
•The sound effect automatically switches to “FLAT” in step 3.
Tip
For recording from the tuner:
If noise is heard while recording from the tuner, move the respective antenna to reduce the noise.