Tape – Play
Loading a tape
1 Press Z PUSH OPEN/CLOSE on the unit.
2 Load a recorded/recordable tape into the cassette holder.
With the side 
you want to 
play/record
facing forward.
Playing a tape
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press TAPE (or FUNCTION + or – repeatedly) to switch the function to TAPE.
3 Press H (or TAPE N on the unit).
Playback starts.
Other operations
To | Do this |
Stop play | Press x. |
|
|
Press m or M. | |
rewind |
|
|
|
Switch to TAPE | Press TAPE N on the unit. |
function from | Playback starts automatically |
another source | when a tape is loaded. |
|
|
Cut the sound | Press MUTING. |
| Press MUTING again or |
| VOLUME + to restore sound. |
|
|
Remove a tape | Press Z PUSH OPEN/CLOSE on |
| the unit in stop mode. |
|
|
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
1
2
3 | Press DVD (or FUNCTION + or – |
| |
| repeatedly) to switch the function to | ||
4 | DVD. | Play/Tape | |
Press CD SYNC on the unit. | |||
| |||
| The tape deck stands by for recording. |
| |
5 | “REC” flashes. | – | |
| |||
Press z REC PAUSE/START on the | Recording | ||
|
unit.
Recording starts.
Tips
•If the tape reaches the end of the front side before completing the recording, the tape stops automatically and the CD/DVD player enters Resume Play mode.
•To continue the recording on the reverse side, press x twice to first cancel the Resume Play, eject and reload the tape, then perform steps 1 and 2 of “To perform Synchro Recording from a desired track” (page 31). You can then continue Synchro Recording from the desired track.
To perform Synchro Recording from a desired track
You can select the first track in Synchro
Recording.
1After performing steps 1 to 4, press . or > repeatedly to select the desired track number.
2Press z REC PAUSE/START on the unit while the selected track number is flashing. Recording starts.
continued 