Press ?/1 to turn on the system.
Press CLOCK/TIMER SET.

Setting the clock

Use buttons on the remote for the operation.

1

2

3 Press . or > repeatedly to set the hour.4 Press ENTER.5 Press . or > repeatedly to set the minute.6 Press ENTER.

The clock starts working.

To adjust the clock

1Press CLOCK/TIMER SET.

2Press . or > to select “CLOCK SET,” then press ENTER.

3Do the same procedures as step 3 to 6 above.

Notes

•The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

•You cannot set the clock in Power Saving Mode (page 37).

Selecting a language

You can change the on-screen display language.

1 Turn on your TV and select the video input.2 Press ?/1 to turn on the system.3 Press DVD (or FUNCTION + or – repeatedly) to switch the function to DVD.

Playback starts automatically if a disc with auto playback function is loaded. Press x to stop playback.

4 Press DISPLAY in stop mode.5 Press < or , repeatedly to select “Language,” then press ENTER.6 Press M or m repeatedly to select “OSD,” then press ENTER.

7 Press M or m repeatedly to select a language from the displayed list, then press ENTER.

8 Press DISPLAY to turn off the Setup Display.

Started Getting

13GB