Optional Components
Controlling the TV with the remote
You can use the following buttons on the remote to operate a Sony TV.
To | Press |
Turn the TV on or off | TV ?/1 while holding |
| down the TV button |
|
|
Switch the TV’s input | TV/VIDEO while holding |
source between the TV | down the TV button |
and other input sources |
|
Change the TV channels TV CH +/– or the number buttons while holding down the TV button
Adjust the volume of | TV VOL +/– while holding |
the TV speaker(s) | down the TV button |
|
|
Using the THEATRE SYNC function
THEATRE SYNC allows you to turn on your SONY TV and this system, change the system mode to “DVD,” and then switch the TV’s input source you set with one button push.
Use the remote for the operation.
1 Press and hold TV/VIDEO while entering the code for the TV’s input source connected to this system (see the table below) using the number buttons.
TV’s input source is selected.
Number | TV’s input source |
0 | No input source (Default) |
|
|
1 | VIDEO1 |
|
|
2 | VIDEO2 |
|
|
3 | VIDEO3 |
|
|
4 | VIDEO4 |
|
|
5 | VIDEO5 |
|
|
6 | VIDEO6 |
|
|
7 | VIDEO7 |
|
|
8 | VIDEO8 |
|
|
Number | TV’s input source |
9 | COMPONENT 1 INPUT |
|
|
CLEAR | COMPONENT 2 INPUT |
|
|
PRESET EQ | COMPONENT 3 INPUT |
|
|
ENTER | COMPONENT 4 INPUT |
|
|
2 Press and hold TV CH + while entering the code for transmit time (see the table below) using the number buttons.
The transmit time from the remote is selected.
Number | Transmit time |
1 | 0.5 (Default) |
|
|
2 | 1 |
|
|
3 | 1.5 |
|
|
4 | 2 |
|
|
5 | 2.5 |
|
|
6 | 3 |
|
|
7 | 3.5 |
|
|
8 | 4 |
|
|
Notes
•This function is only for SONY TV series, however, some TV products may also not work.
•If this function does not work, change the transmit time. The transmit time varies depending on the TV.
•If distance between the TV and this system is too far, this function may not work. Install the system near the TV.
•Keep the remote pointed in the direction of the TV and this system.
•For European and Russian models, if the T LINE- TV jack and COMPONENT VIDEO OUT jacks are both connected to a TV, pressing the THEATRE SYNC button may not switch the TV’s input source, depending on the TV.