Specifications

Design and specifications are subject to change without notice.

For supplied accessories, see page 12.

DVD recorder specificationsSystem

Laser: Semiconductor laser

Channel coverage: PAL/SECAM (B/G, D/K, I, L)

VHF: E2 to E12, R1 to R12, F1 to F10, Italian A to H, Ireland A to J, South Africa 4 to 13/ UHF: E21 to E69, R21 to R69, B21 to B69, F21 to F69/CATV: S01 to S05, S1 to S20, France B to Q/HYPER: S21 to S41

The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances.

Video reception: Frequency synthesizer system

Audio reception: Split carrier system

Aerial out: 75-ohm asymmetrical aerial socket

Timer: Clock: Quartz locked/Timer indication: 24-hour cycle (digital)

Video recording format: MPEG VideoAudio recording format: Dolby Digital/2 chInputs and outputsLINE 2 OUT

(AUDIO): Phono jack/2 Vrms/600 ohms

(VIDEO): Phono jack/1.0 Vp-p

(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL)

LINE 2 IN/LINE 4 IN

(AUDIO): Phono jack/2 Vrms/more than 47 kilohms

(VIDEO): Phono jack/1.0 Vp-p

(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL)

LINE 1 -TV: 21-pin

CVBS IN/OUT

RGB OUT (upstream)

LINE 3/DECODER: 21-pin

CVBS IN/OUT

Decoder

DV IN: 4-pin/i.LINK S100

DIGITAL OUT (OPTICAL): Optical output

jack/–18 dBm (wave length: 660 nm)

DIGITAL OUT (COAXIAL): Phono jack/0.5

Vp-p/75 ohms

COMPONENT VIDEO OUT (Y, PB/CB, PR/CR):

Phono jack/Y: 1.0 Vp-p, PB/CB: 0.7 Vp-p,

PR/CR: 0.7 Vp-p

General

Power requirements: 220-240 V AC, 50/60 Hz

Power consumption: 30W

Dimensions (approx.): 430 ⋅ 75 ⋅ 293 mm (width/height/depth) incl. projecting parts

Mass (approx.): 4.0 kgOperating temperature: 5 ºC to 35 ºCOperating humidity: 25 % to 80 %Compatible colour systems

This recorder is designed to record and play using the PAL colour system.

The signals of the SECAM colour system can be received or recorded but will be played back in the PAL colour system only. Recording of video sources based on other colour systems cannot be guaranteed.

Speaker system specificationsAUDIO POWERAmplifier sectionStereo mode (rated):

55W+55 W (3 ohms at 1 kHz, DIN)

Music power output when in surround mode (reference):

Front: 120 W+120 W (with SS-TS31)/

Centre*: 120 W (with SS-CTRD1)/

Surround*: 120 W+120 W (with SS-TS31B)/

Subwoofer*: 120 W (with SA-WSRD1)

*There may be no sound output depending on the source and the Sound Field setting.

FM/AM tuner section

System: PLL quartz-locked digital synthesizer system

FM tuner: Tuning range: 87.5-108.0 MHz (50 kHz step)/Aerial type: FM wire aerial/Aerial terminal: 75 ohms, unbalanced/Intermediate frequency: 10.7 MHz

AM tuner: Tuning range: 531-1,602 kHz (with the interval set at 9 kHz)/Aerial type: AM loop aerial/Intermediate frequency: 450 kHz

Information Additional

,continued 107