WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
The mains lead must only be changed at a qualified service shop.
This appliance is classified as a CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.
CAUTIONThe use of optical instruments with this product will increase eye hazard. As the laser beam used in this DVD recorder is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
CAUTION | CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. | |
AVOID EXPOSURE TO THE BEAM. | ||
| ||
ADVARSEL | KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. | |
UNDGÅ UDSAETTELSE FOR STRÅLING. | ||
ADVARSEL | KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPENS. | |
UNNGÅ EKSPONERING FOR STRÅLEN. | ||
| ||
VARNING | KLASS 3B SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR | |
ÖPPNAD. STRÄLEN ÄR FARLIG. | ||
VARO! | KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET ALTTIINA | |
LASERÄTEILYLLE. ÄLÄ KATSO SÄTEESEN. |
This label is located on the laser protective housing inside the enclosure.
Notice for customers in the United Kingdom and Republic of Ireland
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362,
(i.e., marked with 
or 
mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
•This unit operates on 220 – 240 V AC, 50/60 Hz. Check that the unit’s operating voltage is identical with your local power supply.
•To prevent fire, do not cover the ventilation of the apparatus with newspapers,
•To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.
Do not throw away the battery with general house waste, dispose of it correctly as chemical waste.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Precautions
On safetyShould any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further.
When disconnecting the mains leads, do not touch the metallic part of the jacks or plugs.
Do not put any object into the holes on the set (fan ventilation holes, jacks, etc.). Electric shock may result.
On power sources•The system is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the system itself has been turned off.
•If you are not going to use the system for a long time, be sure to disconnect the system from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.
•Do not disconnect the AC power cord (mains lead) while the system is in use.
On placement•Place the system in a location with adequate ventilation to prevent heat
•At high volume, over long periods of time, the cabinet becomes hot to the touch. This is not a malfunction. However, touching the cabinet should be avoided. Do not place the system in a confined space where ventilation is poor as this may cause overheating.
•Do not block the ventilation holes for the cooling fan by putting anything on the system. The system is equipped with a high power amplifier. If the ventilation holes are blocked, the system can overheat and malfunction.
•Do not place the system on a soft surface such as a rug that might block the ventilation holes.
•Do not install the system in a confined space, such as a bookcase or
2