2 Set the AMP/DVD switch to AMP, point the remote at the centre unit, and press AMP MENU.

The AMP menu appears.

3 Press M/m to select “SP SETUP” (speaker setup), and press ENTER or ,.

Example:

4 Press M/m to select “SURR SP” (surround speaker), and press ENTER or ,.

SL SR

5 Press M/m to select the setting for the position.

If unsure about the position, see ““SURR SP” (surround speaker)” on page 92.

6 Press < to return to the previous layer.

7 Press M/m to select “FRONT DIST” (front speaker distance), and press ENTER or ,.

L

R

m

 

 

 

8 Press M/m to set the front speaker distance from the listening position.

The display changes in 0.2 m increments, from 1.0 to 7.0 m. Enter the shorter distance if the two speaker distances differ.

Example: When entering 5.8 m for the front left and right speakers.

L

R

m

 

 

 

9 Press < to return to the previous layer.

10Repeat steps 7 to 9 to set “CEN DIST” (centre speaker distance) and “SURR DIST” (surround speaker distance).

11Press AMP MENU to turn off the AMP menu.To better adjust the speaker system

You can change the speaker level etc. See “Speaker Level Settings (“LEVEL”)” (page 93).

Basic hookups and settings are complete. You are ready to start using the system.

30