Sony DAR-RD100 Checking the Status Information on the Centre Unit Display, Speaker Surround Options, To turn down the brightness of the centre unit display (DIMMER)

Speaker Surround Options

Checking the Status Information on the Centre Unit Display

You can set up the speaker system while checking the status information on the centre unit display.

To turn down the brightness of the centre unit display (DIMMER)

AMP/DVD switch

1 2 3

4 5 6

7 8 9

0

Centre unit display

DIGITAL PL A/V SYNC DCS DSGX

LC R LINK SL SW SR

The following information appears.

“; DIGITAL”		Indicates the current audio
(Dolby Digital),		signal format.
“	” (DTS)
“; PL” (Dolby Pro		Indicates the current
Logic), “; PLII”		surround format (page 85).
(Dolby Pro LogicII),
“DCS”

DIMMER

Set the AMP/DVD switch to AMP, and press DIMMER. The centre unit display darkens (“ON”) and brightens (“OFF”) with each press.

“LINK”	Lights up when a 2
	channel source is output
	from the surround
	speakers (page 86).
“DSGX”	Lights up when DSGX is
	activated (page 87).
“A/V SYNC”	Lights up when A/V SYNC
	is activated (page 88).

“L,” “C,” “R,” “SL,” Lights up to indicate the

“SW,” “SR” speaker you are adjusting.

84