,Multilingual subtitles are not recorded on the

DVD VIDEO.

,The DVD VIDEO prohibits changing of the subtitles.

,Try changing the subtitle using the DVD VIDEO’s menu.

,The subtitles cannot be changed for the titles recorded using this recorder.

The angles cannot be changed.

,Multi-angles are not recorded on the DVD VIDEO being played.

,You are trying to change the angles when “ ” does not appear in the front panel display

(page 53).

,The DVD VIDEO prohibits changing angles.

,Try changing the angle using the DVD VIDEO’s menu.

,The angles cannot be changed for the titles recorded on this recorder.

The MP3 audio tracks or JPEG image files do not play.

,The MP3 audio tracks or JPEG image files are not recorded in a format that the recorder can play (page 10).

Recording/Timer recording/Editing

The programme position cannot be changed from the channel you are recording.

,Set the TV’s input source to “TV.”

Recording does not start immediately after you press z REC.

,Operate the recorder only after “LOADING,” “INITIALIZE,” or “WRITE DISC” disappears on the front panel display.

Nothing was recorded even though you set the timer setting correctly.

,The recorder was already turned on at the timer recording start time. Set the recorder to standby mode before timer recording starts.

,There was a power failure during recording.

,The recorder’s internal clock stopped due to a power failure. Reset the clock (page 77).

,The channel was disabled after the timer recording was set. See [Channel Settings] on page 75.

,Disconnect the mains lead from the mains, and connect it again.

,The programme contains copy protection signals that restrict copying.

,Another timer setting overlapped the timer setting (page 46).

,There is no recordable disc inserted in the recorder.

,There is not enough disc space for the recording.

,The disc is protected (DVD+RW, DVD-RW, DVD+R) (page 39).

,The recorder was in the process of DV Dubbing (page 70).

Recording does not stop immediately after you press x.

,It will take a few seconds for the recorder to input disc data before recording can stop.

Timer recording is not complete or did not start from the beginning.

,There was a power failure before or during recording. Reset the clock (page 77).

,Another timer setting overlapped the timer setting (page 46).

,There is not enough disc space for the recording.

,The PDC/VPS function is working (page 43).

Contents previously recorded were erased.

,Data that has been recorded on a DVD with a PC will be erased from the disc when the disc is inserted.

The PDC/VPS function does not operate.

,Check that the clock and date are set correctly.

,Check that the PDC/VPS time you set is the correct one (there might be a mistake in the TV programme guide). If the broadcast you wanted to record did not send accurate PDC/VPS information, the recorder will not start recording.

,If the reception is poor, the PDC/VPS signal might be altered and the recorder might not start recording.

,[PDC/VPS] is set to [Off] (page 43).

DisplayThe clock has stopped.

,Set the clock again (page 77).

,The clock stopped due to a power failure. Reset the clock (page 77).

The TIMER REC indicator is flashing.

,The disc does not have enough space.

104