•To tune in a station manually, press TUNING +/

•To start auto tuning, press and hold TUNING +/

–.If you want to stop scanning, press TUNING +/– again.

If FM sound is noisy

Press FM MODE so that “MONO” appears in the centre unit display. There will be no stereo effect, but reception will improve. To restore the stereo effect, press FM MODE again.

zHints

•You can also select a preset station using the number buttons and SET button.

•To improve reception, reorient the aerials.

•You can also select FM or AM by pressing FUNCTION on the centre unit repeatedly. “AM” or “FM” appears in the centre unit display.

About the Radio Data System (RDS)

The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular broadcast signal. This tuner offers convenient RDS features, such as station name display. RDS is available only on FM stations*.

*Not all FM stations provide the RDS service, neither do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.

Note

RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly, or if the signal strength is weak.

To receive RDS broadcasts

Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name* appears in the display.

*If an RDS broadcast is not received, the station name may not appear in the display.

zHint

When a station name is displayed, you can check the frequency by pressing FM DISPLAY repeatedly.

Using the Sleep Timer

You can set the speaker system to turn off at a preset time, so you can fall asleep listening to music. You can set a time up to 90 minutes in 10- minute increments.

Note

The sleep timer function works for the speaker system only. The recorder remains turned on.

 

 

AMP/DVD

 

 

switch

1

2

3

4

5

6

7

8

9

 

0

 

1

Set the AMP/DVD switch to AMP.Other

Operations

 

SLEEP

 

2

Press SLEEP repeatedly.

 

Each time you press the button, the centre unit display (the remaining time) changes as follows:

SLEEP 90M SLEEP 80M SLEEP 70M

SLEEP OFF SLEEP 10M ..... SLEEP 60M

The “SLEEP” indicator lights up in the centre unit display.

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly to select the desired time.

,continued 97