Sony DAR-RD100 Basic Speaker Settings (“SP SETUP”), Notes, 5 Press ENTER or, To turn off the AMP menu, “CENTER SP” (centre speaker), “SURR SP” (surround speaker)

4 Press M/m to select the item you want to set.

Example: “FRONT DIST” (front speaker distance)

5 Press ENTER or ,.

L R m

6 Press M/m to select a setting.

The setting is applied to the speaker system.

To return to the previous layer

Press <.

To turn off the AMP menu

Press AMP MENU again.

Basic Speaker Settings (“SP SETUP”)

You can input the speaker positions and select whether or not to engage any centre or surround speakers.

Select “SP SETUP” in the AMP menu. To use the AMP menu, see “Using the AMP Menu” (page 91). For details about setting speaker distance, see also “5. Basic speaker setup” (page 29).

The default settings are underlined.

Notes

•The settings below may not be the defaults if you followed “Step 8: Initial Setup” (page 28) to reflect the current speaker placement.

•Change your current settings again should you change the speaker positions.

“CENTER SP” (centre speaker)

“CENTER YES” Normally select this.

“CENTER NO” Select this if no centre speaker is used.

“SURR SP” (surround speaker)

“BEHIND”	Select this if surround
	speakers are located in B.
“SIDE”	Select this if surround
	speakers are located in A.
“NONE”	Select this if no surround
	speaker is used.

	90
A	45 A
B	B
	20

92