Step 3: Performing the Quick Setup
Follow the Steps below to make the basic adjustments for using the system.
Note
•When you connect the system and the TV with the component video cord (not supplied) or HDMI cable (not supplied), you need to set the type of video output for matching your TV. For details, see “Setting the type of video output to match your TV” (page 29).
"/1
C/X/x/c,
DISPLAY
1 Turn on the TV.
2 Press [/1.
Note
•Make sure that the function is set to “DVD” (page 30).
3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 28) and perform again.
4 Press without inserting a disc.
The Setup Display for selecting the language used in the
LANGUAGE SETUP
OSD:ENGLISH
MENU:ENGLISH
AUDIO:FRENCH
SUBTITLE:SPANISH
PORTUGUESE
5 Press X/x to select a language.
The system displays the menu and subtitles in the selected language.
6 Press .
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
VIDEO SETUP
TV TYPE: |
| 16:9 |
PROGRESSIVE (COMPONENT | 16:9 | |
4:3 OUTPUT: | 4:3 LETTER BOX | |
BLACK LEVEL: | 4:3 PAN SCAN | |
BLACK LEVEL (COMPONENT OUT): | OFF | |
PAUSE MODE: |
| AUTO |
7 Press X/x to select the setting that matches your TV type.
xIf you have a
[16:9] (page 54)
xIf you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN] (page 54)
8 Press .
The Setup Display for selecting the speaker formation appears.
9 Press C/c to select the speaker formation image as the speakers are actually positioned.
For details, see “Getting Optimal Surround Sound for a Room” (page 78).
SPEAKER FORMATION
STANDARD
Started Getting