| 530 kHz - 1,610 kHz (with |
| the interval set at 10 kHz) |
Antenna (aerial) | AM loop antenna (aerial) |
Intermediate frequency | 450 kHz |
Video Section |
|
Outputs | VIDEO: 1 |
| COMPONENT: |
| Y: 1 |
| PB/CB, PR/CR: 0.7 |
| 75 ohms |
| HDMI OUT: Type A (19 |
| pin) |
Speakers
Front/Surround (SS-TS80)
Speaker system | Full range Bass reflex, |
| Magnetically Shielded |
Speaker unit | 65 mm (2 5/8 in) cone type |
Rated impedance | 3 ohms |
Dimensions (approx.) | 103 mm × 164 mm × 82 |
| mm (4 1/8 in × 6 1/2 in × |
| 3 1/4 in) (w/h/d) |
Mass (approx.) | 0.6 kg (1 lb 6 oz) |
Center |
|
Speaker system | Full range Bass reflex, |
| Magnetically Shielded |
Speaker unit | 65 mm (2 5/8 in) cone type |
Rated impedance | 3 ohms |
Dimensions (approx.) | 265 mm × 93 mm × 71 mm |
| (10 1/2 in × 3 3/4 in × 2 7/8 in) |
| (w/h/d) |
Mass (approx.) | 0.7 kg (1 lb 9 oz) |
Subwoofer | |
Speaker system | Subwoofer Bass reflex |
Speaker unit | 160 mm (6 3/8 in) cone type |
Rated impedance | 3 ohms |
Dimensions (approx.) | 205 mm × 325 mm × 325 |
| mm (8 1/8 in × 12 7/8 in × |
| 12 7/8 in) (w/h/d) |
Mass (approx.) | 5.2 kg (11 lb 8 oz) |
Subwoofer | |
Speaker system | Subwoofer Bass reflex |
Speaker unit | 160 mm (6 3/8 in) cone type |
Rated impedance | 3 ohms |
Dimensions (approx.) | 225 mm × 395 mm × 325 |
| mm (8 7/8 in × 15 5/8 in × |
| 12 7/8 in) (w/h/d) |
Mass (approx.) | 6.1 kg (13 lb 8 oz) |
General
Power requirements
North American models: 120 V AC, 60 Hz
Mexican models: | 120 V AC, 60 Hz |
Taiwan models: | 120 | V AC, 50/60 Hz |
Argentine models: | 220 | V - 240 V AC, |
| 50/60 Hz | |
Latin American models: | 110 | V - 240 V AC, |
| 50/60 Hz | |
Saudi Arabian models: | 127 | V - 240 V AC, |
| 50/60 Hz | |
Chinese models: | 220 | V - 240 V AC, |
| 50/60 Hz | |
Other models: | 220 | V - 240 V AC, |
| 50/60 Hz | |
Power consumption |
|
|
On: 155 W | ||
| Standby: 0.3 W (at the | |
| Power Saving mode) | |
On: 160 W | ||
| Standby: 0.3 W (at the | |
| Power Saving mode) | |
Output voltage (DIGITAL MEDIA PORT) | ||
DC 5 V | ||
Output current (DIGITAL MEDIA PORT) | ||
700 mA | ||
Dimensions (approx.) | 430 mm × 66 mm × 385 | |
| mm (17 in × 2 5/8 in × | |
| 15 1/4 in) (w/h/d) incl. | |
| projecting parts | |
Mass (approx.) | 4.2 kg (9 lb 5 oz) |
Design and specifications are subject to change without notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not used in the printed wiring boards.
•Over 85% power efficiency of amplifier block is achieved with the full digital amplifier,
Information Additional