*DAV-DZ270 only

**DAV-HDZ278 only

Note

•When you use both the TV/VIDEO (AUDIO IN) jacks (analog connection) and TV/VIDEO (COAXIAL or OPTICAL DIGITAL IN) jack (digital connection) at the same time, the digital connection takes priority (DAV-HDZ278 only).

2 Press SYSTEM MENU.

3 Press X/x repeatedly until “DEC.

MODE” appears in the front panel display, then press or c.

4 Press X/x repeatedly until the decoding mode you want appears in the front panel display.

When you want to output the TV sound or stereo sound of a 2 channel source from the six speakers, select the “PRO LOGIC,” “PLII MOVIE,” or “PLII MUSIC” decoding mode.

For details, see page 32.

5 Press .

The setting is made.

6 Press SYSTEM MENU.

The system menu turns off.

Note

•Depending on your TV, you may need to turn off your TV’s speaker to enjoy surround sound of the system.

Tip

•When listening to audio files using a portable audio source, you can enhance the sound.

Press FUNCTION +/– to select “AUDIO.” Connect the portable audio source. Select “A.F.D. STD” for “DEC. MODE.”

To cancel, select other than “A.F.D. STD.”

Changing the input level of the sound from connected components

Distortion may occur when you listen to a component connected to the TV/VIDEO jacks on the rear panel, or to the AUDIO IN jack on the front panel. Distortion is not a malfunction and will depend on the component connected.

To prevent distortion, reduce the input level on the unit.

1 Press FUNCTION +/– repeatedly until “TV/VIDEO” or “AUDIO” appears in the front panel display.

2 Press SYSTEM MENU.

3 Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press or c.

4 Press X/x to select a setting.

•“ATT ON”: You can attenuate the input level. The output level is changed.

•“ATT OFF”: Normal input level.

5 Press .

The setting is made.

6 Press SYSTEM MENU.

The system menu turns off.

Started Getting

31GB