Symptom

Remedy

Picture noise appears.

• The disc is dirty or flawed.

 

• If the picture output from your system goes through your VCR to get to your

 

TV, the copy-protection signal applied to some DVD programs could affect

 

picture quality. If you still experience problems even when you connect your

 

unit directly to your TV, try connecting your unit to your TV’s video input

 

(page 18).

 

* Depending on the country model, [720 × 576p] may appear.

 

 

Even though you set the aspect

• The aspect ratio on the disc is fixed.

ratio in [TV TYPE] of [VIDEO

 

SETUP], the picture does not fill

 

the TV screen.

 

 

 

Color irregularity occurs on the

The subwoofer and the front speakers in this system are magnetically shielded to

TV screen.

prevent magnetic leakage. However, some leakage may occur, as a high-strength

 

magnet is employed. If this happens, check the following items:

 

• If the speakers are used with a CRT-based TV or projector, install the speakers

 

at least 0.3 meters (1.0 ft) from the TV set.

 

• If the color irregularity persists, turn off the TV set once, then turn it on after 15

 

to 30 minutes.

 

• If howling occurs, reposition the speakers farther away from the TV set.

 

• Make sure that no magnetic object (magnetic latch on a TV stand, health care

 

device, toy, etc.) is placed near the speakers.

 

 

Sound

 

 

 

Symptom

Remedy

 

 

There is no sound.

• The speaker cord is not connected securely.

 

• Press MUTING on the remote if “MUTING ON” is displayed in the front panel

 

display.

 

• The system is in pause mode or in Slow-motion Play mode. Press H to return

 

to normal play mode.

 

• Fast forward or fast reverse is performed. Press H to return to normal play

 

mode.

 

• Check the speaker settings (page 58).

 

• Super Audio CD audio signals are not output from the HDMI OUT jack.

 

• The component connected to the HDMI OUT jack does not conform to the

 

audio signal format, in this case set [AUDIO (HDMI)] in [HDMI SETUP] to

 

[ON] (page 56).

 

 

No sound is output from the

• Set [AUDIO (HDMI)] in [HDMI SETUP] to [ON] (page 56).

HDMI OUT jack.

• The HDMI OUT jack is connected to a DVI (Digital Visual Interface) device

 

(DVI (Digital Visual Interface) jacks do not accept audio signals).

 

• The HDMI OUT jack does not output Super Audio CD sound.

 

• Try the following: 1 Turn the system off and on again. 2 Turn the connected

 

component off and on again. 3 Disconnect and then connect the HDMI cable

 

again.

 

 

The left and right sounds are

• Check that the speakers and components are connected correctly and securely.

unbalanced or reversed.

 

 

 

There is no sound from the

• Check the speaker connections and settings (pages 16, 58).

subwoofer.

• Select “A.F.D. STD” for “DEC. MODE” (page 32).

 

 

Information Additional

89GB