[VIDEO SETUP]
Select settings according to the TV to be connected.
VIDEO SETUP
TV TYPE: | 16:9 |
PROGRESSIVE (COMPONENT OUT): | OFF |
4:3 OUTPUT: | FULL |
BLACK LEVEL: | ON |
BLACK LEVEL (COMPONENT OUT): | OFF |
PAUSE MODE: | AUTO |
x[TV TYPE]
You can select the aspect ratio of the connected TV.
[16:9]: Select this when you connect a wide- screen TV or a TV with a wide mode function.
[4:3 LETTER BOX]: Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the TV screen.
[4:3 PAN SCAN]: Select this when you connect a 4:3 screen TV. The system automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.
x[PROGRESSIVE (COMPONENT OUT)]
You can set the progressive signal that is output from the COMPONENT VIDEO OUT jacks to on/off. For details, see “Does your TV accept progressive signals?” (page 29).
[OFF]: The system outputs interlace signals.
[ON]: The system outputs progressive signals. When you select [ON], follow the Steps below.
1 Select [ON], then press 
.
The confirmation display appears.
2 Press C/c to select [START].
The system outputs the progressive signal for 5 seconds. Check that the screen is displayed correctly.
3 Press C/c to select [YES].
The system outputs the progressive signal. If you select [NO], the system will not output the progressive signal.
•[PROGRESSIVE (COMPONENT OUT)] is effective only when you connect the unit and TV with a component video cord (page 18).
x[4:3 OUTPUT]
When you use a 16:9 aspect ratio TV, you can adjust the aspect ratio to watch 4:3 aspect ratio signals. If you can change the aspect ratio on your TV, change the setting on your TV, not the system.
[FULL]: Select this when you can change the aspect ratio on your TV.
[NORMAL]: Select this when you cannot change the aspect ratio on your TV. A 16:9 aspect ratio signal with black bands on left and right sides of the image appears.
| 16:9 aspect ratio TV | |
• Depending on the DVD, [4:3 LETTER BOX] may be | Note | |
• [4:3 OUTPUT] is effective only when you set [TV | ||
selected automatically instead of [4:3 PAN SCAN] or | ||
TYPE] in [VIDEO SETUP] to [16:9]. | ||
vice versa. | ||
|