Symptom

Remedy

Severe hum or noise is heard.

• Check that the speakers and components are connected securely.

 

• Check that the connecting cords are away from a transformer or motor, and at

 

least 3 meters (10 ft) away from your TV set or a fluorescent light.

 

• Move your TV away from the audio components.

 

• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with

 

alcohol.

 

• Clean the disc.

The sound loses stereo effect when you play a VIDEO CD, a CD, or an MP3 file.

•Set [AUDIO] to [STEREO] by pressing AUDIO (page 37).

•Make sure the unit is connected properly.

The surround effect is difficult to hear when you are playing a sound track of Dolby Digital, DTS, or MPEG audio.

•Make sure the “DEC. MODE” setting (page 32).

•Check the speaker connections and settings (pages 16, 58).

•Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.

The sound comes from the center • Depending on the disc, the sound may come from the center speaker only. speaker only.

No sound is heard from the center speaker.

•Check the speaker connections and settings (pages 16, 58).

•Make sure the “DEC. MODE” setting (page 32).

•Depending on the source, the effect of the center speaker may be less noticeable.

•A 2 channel source is being played.

No sound or only a very low- level sound is heard from the surround speakers.

•Check the speaker connections and settings (pages 16, 58).

•Make sure the “DEC. MODE” setting (page 32).

•Depending on the source, the effect of the surround speakers may be less noticeable.

•A 2 channel source is being played.

There is no sound from the

• The sampling frequency of the input signal is more than 48 kHz.

DIGITAL IN COAXIAL/

 

OPTICAL jack (DAV-HDZ278

 

only).

 

 

 

Operation

 

 

 

Symptom

Remedy

Radio stations cannot be tuned in.

•Check that the antenna (aerial) is connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary.

•The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.

•No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 61).

•Press DISPLAY so that the frequency appears in the front panel display.

The remote does not function.

• There are obstacles between the remote and the unit.

 

• The distance between the remote and the unit is too far.

 

• The remote is not pointed at the remote sensor on the unit.

 

• The batteries in the remote are weak.

 

 

90GB