Registering Bluetooth devicesRegistering a Bluetooth device

To enable your camcorder to communicate with a Bluetooth device, the devices should be registered with each other. Here we describe how to register the Sony Modem Adaptor with Bluetooth Function. Once registration is complete, you do not have to reregister the Bluetooth device as long as you do not cancel registration. You can register up to three Bluetooth devices on your camcorder. Refer also to the operating instructions supplied with your Bluetooth device.

For details of Bluetooth devices compatible with your camcorder, access the following URL:

For customers in Canada http://www.sony.ca/service/

For customers in the areas other than Canada http://www.css.ap.sony.com/

Using the Modem Adaptor with Bluetooth Function

Connect your camcorder to a Bluetooth device by Bluetooth wireless technology.

Your camcorder

Modem Adaptor with Bluetooth

 

Function (not supplied)

Notes

•When using Sony BTA-NW1/BTA-NW1A Modem Adaptor with Bluetooth Function, place it so that there are no obstacles between your camcorder and the device. The distance between the devices must be within 10 m (33 feet).

•The connection may be interrupted depending on the communication conditions. •When your camcorder is connected to a USB device, your camcorder cannot

communicate via a Bluetooth device.

•Do not remove the battery pack while your camcorder is communicating with Bluetooth devices. Doing so may cause malfunction of your camcorder.

1Preparing a Modem Adaptor with Bluetooth Function

Set a Modem Adaptor with Bluetooth Function to connection standby (BONDING). For details, refer to the operating instructions supplied with your Modem Adaptor.

24-GB