
Troubleshooting
Troubles about sending a still image–
SEND does not function.
cA still image is not being played back.
cAn invalid image is being played back.
The message “Bluetooth Authentication Error” appears, and you cannot send a still image.
cThe authentication time limit (30 seconds) is over.
cYou did not enter the correct passkey.
cThe connected device was disconnected.
cThe passkey you entered is wrong. Enter the correct passkey.
The message “Bluetooth Connection Error” appears, and you cannot send a still image.
cThe Bluetooth device you want to connect to is not turned on.
cThe Bluetooth device is too far from your camcorder.
cThe radio waves between your camcorder and the connected device were blocked.
cThe Bluetooth device you want to connect to is already connected to other devices.
cThe connected device was disconnected.
cThe Bluetooth device you want to connect to is not compatible with BIP.
The message “Bluetooth Communication Disconnected” or “Send Error” appears, and you cannot send a still image.
cThe connected Bluetooth device is turned off.
cThe Bluetooth device is too far from your camcorder.
cThe radio waves between your camcorder and the connected device were blocked.
cThe connected device was disconnected.
cThe Bluetooth device you want to connect to is not compatible with BIP.
cThe connection was rejected by the connected Bluetooth device. Check the settings or operations of the connected device.
cYou sent the still image that the connected Bluetooth device cannot receive.