6 Press MENU/NO.

7 Press MD S.

Recording starts.

Start playing the desired source (CD, etc.) to record.

If there is an extended silence of less than about 30 seconds, “Smart Space” appears, and the MD deck replaces the silence with a blank of about 3 seconds and continues recording.

If there is no sound input for about 30 seconds or more, “Auto Cut” appears, and the MD deck replaces the silence with a blank of about 3 seconds and switches to recording pause. Press MD H to restart the recording.

To stop recording

Press MD s.

To turn off Smart Space and Auto Cut functions

1Press MENU/NO during recording pause. “Setup?” appears, then press ENTER/YES.

2Turn MD JOG until “S.Space On” appears, then press ENTER/YES.

3Turn MD JOG until “S.Space Off” appears, then press ENTER/YES.

4Press MENU/NO.

Tip

The Smart Space and Auto Cut functions are factory set to on. If you turn off the system or disconnect the mains lead, the MD deck will retain the last setting (S.Space On or Off).

Adjusting the recording level

When recording on an MD, you can adjust the recording level to the desired volume. You can adjust the recording level not only when making an analogue recording, but also when making a digital recording from a CD, etc.

Note

During Synchro-recording, the recording level is fixed at 0.0 dB regardless of the setting.

?/1 (Power)

1

4,5,7

 

 

 

 

 

 

 

 

1

2

3

4

5

MD s 2 10 4,8 5,6

1 Press one of the function buttons to select a sound source to be recorded.

continued

MD The

— Deck

Recording

37