Disc Full!

There is no time remaining on the MD.

Eject

The MD deck is ejecting the MD.

Impossible

•You tried to make an impossible editing operation.

•You cannot combine the tracks due to the system limitations of MDs.

Incomplete!

The S.F Edit (changing the recording level after recording, Fade-in, Fade-out) operation was not performed properly because the system was moved while recording was in progress or the MD is damaged or dirty .

Initialize

The power was off for a long time, so the system is initializing itself.

Name Full!

There is no more space to store track or disc titles.

MD No Disc

There is no disc in the MD deck.

MD No Name

You tried to show the title of a non-labelled disc or track. Track number is displayed followed by “MD” in case of a track.

No Change

While attempting to change the recording level after recording, you pressed ENTER/YES without actually changing the recording level, so no change was made.

Over

You have reached the end of the MD while pressing and holding M during playing pause.

Overwrite

You specified recording over recorded tracks on an MD during recording.

Push MD STOP

You pressed PLAY MODE during play.

—Rehearsal—

The MD is playing the specified dividing point for confirmation during the Divide function.

S.F Edit!

You attempted to perform another operation while in S.F Edit (changing the recording level after recording, Fade-in, Fade-out) mode.

S.F Edit NOW

You pressed ?/1 while in S.F Edit (changing the recording level after recording, Fade-in, Fade-out) mode.

Smart Space

The signal was input again after silence continued for about 3 or more but less than about 30 seconds during digital recording.

SYNC NOW

You pressed a button not needed for recording during Synchro-recording.

Text Protect

There is CD TEXT information which cannot be recorded on the MD.

TOC Reading

The MD deck is reading the TOC information of the MD.

TOC Writing

The MD deck is writing the information of recorded or edited contents.

Track End

You have reached the end of the track while adjusting the dividing point during the Divide Function.

USE MD AREA!

You tried to perform an operation with the jog dial, m or M on the A/V control amplifier with the function set to MD.

Use MD JOG, MD m or M.

continued

Information Additional

75