Dividing recorded tracks

Divide Function

You can use this function to mark track numbers after recording. The total number of tracks increases by one and all the tracks following the divided ones are renumbered.

E.g.: Dividing track 2 into two tracks.

Track

 

 

 

 

 

 

 

 

 

 

 

number

 

 

1

 

2

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

Original

 

A

 

 

B

 

 

C

 

D

tracks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Divide track 2 into

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

track B and C

 

1

 

2

 

 

3

 

 

4

 

 

 

 

 

 

After

 

A

 

 

B

C

 

D

DIVIDE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

?/1 (Power)

 

 

 

1

 

 

3,4,6

1

2

3

4

5

1 Press MD to switch the function to MD.

2 Press MENU/NO to display “Edit Menu”.

3 Turn MD JOG until “Divide?” appears, then press ENTER/YES.

4 Turn MD JOG until the desired track number to divide appears, then press ENTER/YES.

“—Rehearsal—” appears and the portion to be divided is played repeatedly.

5 While monitoring the sound, turn MD JOG to adjust the point to be divided.

You can shift the dividing point by 1/86 second (1 frame)* intervals.

To shift the point by minute or second intervals, press MD m or M so that minute or second flashes, then turn MD JOG.

*You can shift the dividing point by 2-frame intervals (tracks recorded in Monaural or LP2 Stereo mode) or by 4-frame intervals (tracks recorded in LP4 Stereo mode).

6 Press ENTER/YES.

“Complete!” appears for a few seconds and the newly created track starts playing.

To cancel dividing

Press MENU/NO.

To return to the condition beforeDIVIDE

You can return to the original condition immediately after dividing the tracks (see page 51). You can also return to the original condition by using the Combine Function (see page 49).

2 3,4,5

48