
Each time you press DISPLAY, the display changes as follows:
tStation name* r
Frequency
r
Programme type*
r
Clock display
r
Effect (P FILE) name or “EFFECT ON (OFF)”
*If the RDS broadcast is not received, the station name and programme type may not appear in the display.
Tip
Pressing and holding DISPLAY for 2 seconds or more switches the spectrum analyzer ON/OFF.
Locating a station by
programme type (PTY)
You can locate a station you want by selecting a programme type. The system tunes in the type of programmes currently being broadcast from the RDS stations stored in the tuner’s preset memory.
?/1 | (Power) | 1 |
|
1 Press REPEAT/PTY while listening to the radio.
2 Turn jog dial to select the programme type you want. See the “List of programme types” section below.
3 Press ENTER.
The system starts searching the preset RDS stations (“SEARCH” and the selected programme type are shown alternately in the display).
When the tuner receives a programme, the preset station name flashes.
4 Turn jog dial to display the preset station name you desire.
5 Press ENTER while the preset station name is flashing.
To cancel PTY searchPress REPEAT/PTY again.
List of programme types (PTY)NEWSNews programmes.
AFFAIRSTopical programmes that expand on current news.
INFORMATIONProgrammes about consumer affairs, medical advice.
SPORTSports programmes.
EDUCATIONEducational programmes, such as
Radio plays and serials.
continued
61