Erasing recordings (continued)

4 Press ENTER/YES again.

“—Rehearsal—” and “Point A ok?” appear alternately while the deck repeats the portion from a few seconds before point A to point A.

5 While monitoring the sound, turn MD JOG to find the starting point of the portion to be erased (point A).

You can shift the starting point by 1/86 second (1 frame)* intervals.

To shift the point by minute or second intervals, press MD m or M so that minute or second flashes, then turn MD JOG.

*You can shift the starting point by 2-frame intervals (tracks recorded in Monaural or LP2 Stereo mode) or by 4-frame intervals (tracks recorded in LP4 Stereo mode).

6 Repeat step 6 until point A is played correctly.

7 Press ENTER/YES if point A is correct.

“Point B Set” appears and playback for setting the ending point of the portion to be erased (point B) starts.

8 Continue playback until the deck reaches point B, then press ENTER/ YES.

“A-B Ers” and “Point B ok?” appear alternately and the deck repeats a portion of the few seconds before point A and after point B successively.

9 Turn MD JOG to find point B.

The procedure is the same as step 6.

10 Press ENTER/YES if point B is correct.

“Complete!” appears for a few seconds and the portion between point A and B is erased.

To cancel A-B Erase

Press MENU/NO.

To return to the condition before erasing

You can return to the original condition immediately after erasing the tracks (see page 51).

Note

If “Impossible” appears, the specified portion cannot be erased. This happens when you have edited the same track many times. This is due to a technical limitation of the MD system and is not a mechanical error.

46