Labelling an MD (continued)

3 Press CHARACTER to select the desired type of character.

Each time you press the button, the display changes as follows:

(Blank space) t A (Upper cases) t a (Lower cases) t 0 (Number) t ’ (Symbols) t (Blank space) t …

4 Turn MD JOG to select the desired character.

To enter a blank space

Press MD M without turning MD JOG.

To enter a symbol

You can use the following 24 symbols.

’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @ `

5 Press MD M.

The character you selected in step 4 stops flashing and the cursor shifts to the right.

Cursor

6 Repeat steps 3 to 5 to complete the entire title.

If you make a mistake

Press MD m or M until the character you want to change flashes, then repeat steps 3 to 5.

To erase a character

Press CLEAR while the character is flashing. You cannot insert characters.

7 Press ENTER/YES to complete the labelling procedure.

The titles you labelled appear sequentially, and then the original display appears.

To cancel labelling

Press MENU/NO.

Notes

•You can label a track title during play. The playback repeats until you finish labelling.

•If the MD is record protected, “C11” and “Protected” appear alternately and the MD cannot be recorded. Remove the MD, then slide the record protection tab to the closed position (see page 27).

Copying a disc or track title

You can copy a labelled disc or track title to use it as a title of another track or the disc title within a disc.

1Press MENU/NO in stop mode.

2Turn MD JOG until “Name?” appears, then press ENTER/YES.

3Turn MD JOG until “Nm Copy?” appears, then press ENTER/YES.

4Turn MD JOG to select “Disc” (when copying the disc title) or the track number with the title you want to copy, then press ENTER/YES.

5Turn MD JOG to select the copy destination track number or “Disc” (when copying as the disc title), then press ENTER/YES.

When “Overwrite??” appears

The copy destination already has a disc or track title. To continue and copy the title, press ENTER/YES.

To cancel copying

Press MENU/NO.

42