Labelling the preset stations (continued)

To cancel labelling

Press TUNER NAME.

To check the preset number and frequency

The station name appears when you tuned the labelled station.

To check the preset number and frequency, press DISPLAY. The preset number and frequency are displayed for 4 seconds and it returns to the station name display.

To erase the name

1Repeat steps 1 to 3.

2Press CLEAR on the remote repeatedly to erase the name.

3Press ENTER.

Note

When the tuner receives an RDS broadcast, the RDS station name appears instead of the station name you have programmed in the memory.

Using the Radio Data System (RDS)

(European model only)

What is the Radio Data System?

Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular programme signal. This tuner offers convenient RDS features like station name display and location of stations by programme type. RDS is available only on FM stations.*

Note

RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak.

*Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.

Receiving RDS broadcasts

,Simply select a station from the FM band.

When you tune in a station that provides RDS services, the station name appears in the display.

60