Self-diagnosis Display (continued)TUNER

Cannot Edit

You tried to label or erase a non-preset station.

CD

“Check” and “CD Position” appear alternately

The disk could not be read properly.

No disc

There is no disc in the CD player.

Over

You have reached the end of the CD while pressing and holding Mduring pause.

Push CD stop!

You pressed PLAY MODE during play.

SpecificationsAmplifier section

European model

DIN power output (rated) 80 + 80 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference) 100 + 100 watts

(6 ohms at 1 kHz, 10% THD)

Music power output (reference)

160 + 160 watts

(6 ohms at 1 kHz, 10% THD)

Other models

DIN power output (rated)

90 + 90 watts

 

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

 

110 + 110 watts

 

(6 ohms at 1 kHz, 10% THD)

Inputs

 

VIDEO IN:

voltage 250 mV

(phono jacks)

impedance 47 kilohms

TAPE IN:

voltage 250 mV

(phono jacks)

impedance 47 kilohms

Outputs

 

TAPE OUT:

voltage 250 mV

(phono jacks)

impedance 1 kilohms

PHONES:

accepts headphones of 8 ohms or

(stereo mini jack)

more

FRONT SPEAKER:

accepts impedance of 6 to 16 ohms

REAR SPEAKER:

accepts impedance of 16 ohms

SUPER WOOFER:

voltage 1 V, impedance 1 kilohms

CD player section

System

Compact disc and digital audio

 

system

Laser

Semiconductor laser

 

(λ=780 nm)

 

Emission duration: continuous

Laser output

Max. 44.6 µW*

 

*This output is the value measured

 

at a distance of 200 mm from the

 

objective lens surface on the

 

Optical Pick-up Block with 7 mm

 

aperture.

Wavelength

780 – 790 nm

Frequency response

20 Hz – 20 kHz (±0.5 dB)

Signal-to-noise ratio

More than 90 dB

Dynamic range

More than 90 dB

76