4 Adjust the spacer to feed the protective sheet you will use for cleaning.

5 Place the protective sheet contained in the printing pack in the paper tray.

Insert the protective sheet with the no-imprint side facing up and the arrow pointing in the same direction as the arrow in the tray. Insert the paper behind the spacer (toward the feeding direction).

Arrows in the reverse side

Spacer

6 Set the paper tray into the printer and press PRINT.

The cleaning cartridge and protective sheet will clean inside the printer. After the cleaning is finished, the protective sheet is automatically ejected.

7 Remove the cleaning cartridge and protective sheet from the printer.

Tips

•Keep the cleaning cartridge and protective sheet together for future cleaning.

•With a protective sheet, you can carry out cleaning for the maximum of about 20 times.

When cleaning ends

Set the print cartridge and print paper into the printer.

Notes

•Carry out cleaning only when there are white lines or dots on the print.

•When you can obtain proper printing performances, cleaning will not improve the printed picture quality.

•The maximum cleaning times that you can carry out is approximately 20. As the number of cleaning times increases, the cleaning loses its effect.

•Do not place the protective sheet on the print paper and carry out cleaning, which may cause paper jam or other troubles.

•If a cleaning does not improve printed picture quality, please carry out cleaning a couple of times.

Troubleshooting

125 GB