PictureGear Studio allows you to carry out a series of procedures for handling a still
1 Start the PictureGear Studio.
The PictureGear Studio window is displayed.
2 Click “Photo Collection”.
The “Photo Collection” window is displayed.
3 Click the desired photo category folder.
For explanations, “Sample” folder is selected in the following example.
4 Click “Print.”
The Print dialog box is displayed.
5 Select the photos that you want to print, set the number of copies to be printed for each photo, and then click “Apply”.
The print paper selection dialog box is displayed.
Note
Make sure to set the print quantity in this dialog box. Even if you set the number of copies in “Paper/Output” tab of the “Sony
96 GB