1 Make sure that the printer is disconnected from the computer.
Note
If you connect the printer to your PC in this stage, either of the following dialog boxes are displayed:
•When using Windows 98SE/Me: Add New Hardware Wizard
•When using Windows 2000/XP: Found New Hardware Wizard
If this occurs, disconnect the printer from the PC and then click “Cancel” in the dialog box.
2 Turn on your computer and start Windows.
•When installing or uninstalling the software in Windows® 2000 Professional, log on to Windows as “Administrator” or “Power user”.
•When installing or uninstalling the software with Windows® XP Professional/Home Edition, log on using a “Computer administrator” user account.
Notes
•Be sure to close all running programs before installing the software.
•The dialog boxes in this section are those in Windows XP Professional, unless otherwise specified. The installation procedures and the dialog boxes shown differ depending on the operating system.
3 Insert the supplied
The setup starts automatically and the installation window is displayed.
Note
In case the installation window is not automatically displayed,
4 Click “Installing Printer Driver.”
The “Sony
mode) (PC PC a from Printing
Continued
87 GB