Note

Once you select “Execute”, you cannot move or delete the characters.

Registering commonly-used characters as a message

You can register commonly-used characters as a message and can load them later onto the character input box. Up to three messages, each message with the maximum of 80 characters, can be registered.

1 Follow steps 1 through 5 in “Superimposing characters” (pages 36 and 37) to enter characters that you want to register as a message in the input box.

2 Press the arrow (B/b/V/v) button to select “LOAD/SAVE” and press ENTER.

The dialog box to register and save messages is displayed.

3 Press the arrow (B/b) button to select “Save” and then press ENTER.

The message selection screen is displayed.

4 Press the arrow (V/v) button to select the message box that you want to save the characters in and press ENTER.

The input characters are registered as a message.

To load a registered message

In step 3 above, select “Load” to display the window used for selecting a message.

Press the arrow (V/v) button to select the desired message and press ENTER. The selected message is placed in the character input box.

Note

The characters having been input in the input box will be overwritten and replaced with the message.

Continued

mode) OUT (MONITOR monitor TV a using Printing

39 GB