Printing from a PC (PC mode)
To print from a PC connected to the printer, you need to install the supplied software (printer driver and PictureGear Studio) to your PC.
This section explains how to install the supplied software on your PC and how to use the supplied PictureGear Studio software to print an image.
Please also refer to the operating instructions of your PC.
On trademarks and copyrights of PictureGear Studio
•On copyrights of design materials
The copyrights of the design materials contained in this software are owned by Sony Corporation or Sony Music Communications Corporation. Any commercial use is prohibited by the copyrights laws.
•Duplication of copyrighted materials, such as photographs, is prohibited except for private or domestic use.
•All other companies and product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, “™” and “®” are not mentioned in each case in this manual.
System requirements
To use the supplied software, your PC must meet the following system requirements:
System requirements for the printer driver
OS: Microsoft Windows 98SE/Windows Me/ Windows 2000 Professional/ Windows XP Home Edition/ Windows XP Professional, pre- installed
CPU: Pentium II 400MHz or faster is recommended.
RAM: 64 MB or more is recommended.
Hard disk space: 200 MB or more is recommended.
System requirements for PictureGear Studio
OS: Microsoft Windows 98SE/Windows Me/ Windows 2000 Professional/ Windows XP Home Edition/ Windows XP Professional, pre- installed (IBM PC/AT compatible) (Windows 95, Windows 98 Gold Edition, Windows NT, other versions (ex. Server, Personal) of Windows 2000 are not supported.)
CPU: Pentium III 500MHz or faster (Pentium III 800MHz or faster is recommended.)
mode) (PC PC a from Printing
Continued
85 GB