Uninstalling the PictureGear Studio
When the software becomes unnecessary, remove it from your PC hard disk as follows:
1 Remove the USB cable between the printer and the PC.
2 Insert the supplied
The setup starts automatically and the installation window is displayed.
Note
In case the installation window is not automatically displayed,
3 Click “Installing PictureGear Studio.”
The “PictureGear Studio Setup” dialog box appears.
4 Click “Next.”
The dialog box used for confirming deletion is displayed.
5 Click “OK.”
The deletion complete dialog box is displayed.
6 Click “Finish.”
The relevant files are deleted.
mode) (PC PC a from Printing
Continued
95 GB