What is “PictureGear Studio Media Watcher”?

The PictureGear Studio Media Watcher detects insertion of a device or medium storing photos when the PictureGear Studio is installed in an operating system other than the Windows XP. You can also register the PictureGear Studio Media Watcher later with the following steps:

1After you install the PictureGear Studio software, click “Start”, “Programs”, “PictureGear Studio”, “Tools”, and then “Media Watcher”.

The PictureGear Studio Media Watcher is started.

2Click the PictureGear Studio Media Watcher icon on the taskbar with the right mouse button, and click “Settings” from the menu displayed.

3Check “Starts the Media Watcher when you log on Widows”.

7 To display the Readme file, check “View Readme” and then click “Finish”.

•When you check “View Readme,” the Readme file is displayed. When you close the Readme file, the PictureGear Studio Setup dialog box is also closed.

•When you do not check “View Readme,” the PictureGear Studio Setup dialog box is closed.

8 Remove the CD-ROM from your computer and keep it for future use.

Notes

•If the installation fails, do the installation procedures from step 2.

•The supplied CD-ROM will be required when you uninstall or re-install the PictureGear Studio. Keep it in good order for possible future use.

•The PictureGear Studio supplied with the DPP-EX50 has the following limitations:

–In PhotoCollection, you cannot select paper other than “Sony.”

–In PrintStudio, you cannot create or print “Label.”

–In PrintStudio, you cannot create or print a “Sticker, name card, or card.”

–In PrintStudio, you cannot print part of “Postcard” designs.

To delete the above limitations and upgrade the software to the version supplied with VAIO computer or CLIE handheld, execute the “Setup.exe” in the “pgs.add” folder.

94 GB