Sony DSC-WX10 manual Starting up PMB Portable Macintosh

Cyber-shot User Guide

Print

		Top page > Using with your computer > Uploading images to a media service > Starting up
Operation Search		“PMB Portable” (Macintosh)
Before Use		Starting up “PMB Portable” (Macintosh)
Shooting
Viewing		When using with a Macintosh computer, it is necessary to set the region the first time. Perform
		the setting as explained below. After setting the region, steps 3-4are unnecessary when used
Using 3D Functions
	after that.
Using MENU items (Shooting)		1. Make a USB connection between the camera and a Macintosh computer.
		When you connect the camera and your computer, [PMBPORTABLE] appears on the
Using MENU items (Viewing)
		desktop.
Changing settings		Click [×] to close any unnecessary drives.
		2. Click [PMBP_Mac] in the [PMBPORTABLE] folder.
Viewing images on a TV
		The Region Selection screen appears.
Using with your computer		3. Select the appropriate [Region] and [Country/Area], and then click [OK].
Printing		The User Agreement screen appears.
		4. Read the agreement carefully. If you accept the terms of the agreement, click [I Agree].
Troubleshooting		“PMB Portable” starts up.
Precautions/About this camera
		Notes
Contents list		“PMB Portable” is not supported for AVCHD movies.
		Set [LUN Setting] in [Main Settings] to [Multi].
		If you cannot start up “PMB Portable”, set [USB Connect Setting] to [Mass Storage].
		Always connect to a network when using “PMB Portable”.
		When uploading images over the Internet, the cache may remain in the computer being
		used depending on the service provider. This is also true when this camera is used for this
		purpose.
		When a bug occurs in “PMB Portable” or you delete “PMB Portable” by mistake, you can
		repair “PMB Portable” by downloading the PMB Portable installer from the website.

Back to top

Copyright 2011 Sony Corporation

218