Cyber-shot User Guide

Operation Search

Before Use

Shooting

Viewing

Using 3D Functions

Using MENU items (Shooting)

Using MENU items (Viewing)

Changing settings

Viewing images on a TV

Using with your computer

Printing

Troubleshooting

Precautions/About this camera

Contents list

Print

Top page > Shooting > Using shooting functions > Burst/Bracket

Burst/Bracket

You can select Single (single-image), Burst or Bracket as the shooting mode.

1.Press (Burst Settings) on the control wheel.

2.Select the desired mode with the control wheel.

(Single) The camera shoots a single image.

The camera shoots 10 continuous frames in one burst when you hold down the shutter button.

(Burst)

(Bracket)

The camera shoots a series of 3 images each with a different setting.

 

Notes

[Flash] is set to [Off].

When recording with the self-timer, a series of 10 images is recorded if [Burst] is selected and a series of 3 images, each with different settings, is recorded if [Bracket] is selected. When [Burst] is selected, [Focus], [White Balance], and [EV ] are adjusted for the first image, and these settings are also used for the other images.

When the battery level is low, or when the internal memory or a memory card is full, the burst stops.

[VGA] image size will be set while recording on internal memory.

You may not be able to set some functions or MENU items depending on the selected REC mode. For details, see “Functions not available in some REC modes” [Details] and “MENU items not available in some REC modes.” [Details]

Related Topic

Burst Shooting Interval

Bracket Setting

Back to top

Copyright 2011 Sony Corporation

71

Page 71
Image 71
Sony DSC-WX10 manual Burst/Bracket, Related Topic