Sony DSR-30 Menu choices

Note

Menu settings are held even after the VCR is disconnected from the AC power source.

Menu choices

Initial settings are indicated in bold letters.

PAGE 1

Menu option	Set this option to
L1 IN VIDEO	• S to select the S video signal when both
	the S video and video jacks are
	connected. The video signal is selected
	automatically when only the video jack is
	connected.
	• NORM to select the video signal when
	both the S video and video jacks are
	connected.
	(When you use the S video picture, make
	sure to set to “S.”)
AUDIO MODE	• 16 to record the audio from the LINE-1
	IN/LINE-2 IN jacks in 16bit (Fs48k)
	recording mode. You can record higher-
	quality sound.
	• 12 to record the audio from the LINE-1
	IN/LINE-2 IN jacks in 12bit (Fs32k)
	recording mode. You can record the
	audio on 2 tracks, STEREO 1 and
	STEREO 2.
	(The audio from the DV IN connector is
	recorded in the same audio recording mode
	as the source tape.)
TIME CODE	• DF to set the time code to Drop Frame.
(DSR-30 only)	• NDF to set the time code to Non Drop
	Frame.
CM (Cassette Memory) SEARCH	• ON to search recordings with the cassette
	memory. If the tape does not have a
	cassette memory, the VCR will search
	recordings using index signals recorded
	on the tape itself.
	• OFF to search recordings using the index
	signals recorded on the tape.
LANC MODE	• M to control another VCR from this VCR
	using the lLANC connection.
	• S to control this VCR from another
	equipment using the lLANC
	connection.
	(When you connect a video printer and use
	the PRINT button on the remote
	commander supplied with this VCR, set
	LANC MODE to “S.”)
SHUTTLE MODE	• A to control, via the lLANC connection,
	a VCR that doesn’t have a reverse slow
	motion function.
	• B to control, via the lLANC connection,
	a VCR that has a reverse slow motion
	function.

(continued)

Getting Started 21 EN