Auto Repeat

Note

The VCR cannot search for an index or unrecorded portion within 20 seconds from the beginning of the tape.

EXTERNAL TIMER switch

to a wall outlet

Caution

While a tape is running, do not turn off the power, using an AC timer. The VCR and a tape may be damaged. When turning off the power of the VCR, make sure to press p on this VCR first to stop the tape transport, then turn off the power.

This VCR can repeat the playback of all or part of the tape automatically.

1 Set the EXTERNAL TIMER switch at the rear of the main unit to “PB [AUTO REPEAT].”

The AUTO REPEAT indicator on the front panel lights.

2 Press (.

Playback starts automatically. The VCR repeats the playback from the beginning to the first index (if there is no index on the tape, to the unrecorded portion; if no unrecorded portion, to the tape end).

Auto Repeat using an external AC timer

If you connect an external AC timer (not supplied) to this VCR, you can repeat playback automatically at the preset time.

1 Connect an external AC timer (not supplied) to this VCR.

2 Set the EXTERNAL TIMER switch at the rear of the main unit to “PB [AUTO REPEAT].”

The AUTO REPEAT indicator on the front panel lights.

3 Set the timer-on time on the external AC timer.

At the preset time, the power turns on, and after a few 30 seconds (no more than 30), Auto Repeat playback starts automatically.

To stop Auto Repeat

Press p.

To release Auto Repeat mode

Set the EXTERNAL TIMER switch to “OFF.”

Playback 31 EN